3M™ Particulate Filter 2128 GP2

Provides protection against: Particulates (P2), Ozone and Nuisance Level* Acid Gas and Organic Vapours with Low Vapour Pressure.

Protection Factors:
Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels. 

This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:

• With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES).
• With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES.
• Organic compounds with low vapour pressures (<1.3Pa @ 25 degrees Celsius) in concentrations up to 10 x WES.
• Ozone up to 10 x WES. 
• Offers relief from acid gases and organic vapours at levels below the WES.

Common Applications/Hazards: 

• Made from 3M high performance filter media for effective filtration efficiency.
• Lightweight and provides low breathing resistance.
• Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators.

Suggested Applications:

• Common Applications/Hazards: For protection against welding fume, ozone, polishing and grinding particles. Also for spraying pesticides or herbicides with vapour pressure <1.3 Pa @ 25°C.